You design the system. We pull the cable, hang the antennas and sweep test the runs, built to your design. Nationwide service.
ERRCS install labor, built to the integrator's design. You supply the material, headend and donor antenna. Our crews put it in.
We pull distribution cable along the routes on your design.
We terminate with the vendor connectors you specify.
We hang splitters and indoor antennas where the design puts them.
We sweep test the cable runs and send you the results.
We install supports and clean, code-compliant cable management. Sleeves are installed by the electrical contractor.
We do structured cabling nationwide, mainly on hotels and multifamily. One low-voltage sub can handle both scopes.
RF design, cellular DAS, system commissioning and monitoring are handled by the integrator or our integrator partners. They are not part of our scope.
We work as your field crew. You own the design and the system, and we keep the install on schedule.
We test what we install and document it, so the integrator has what it needs for AHJ and fire marshal acceptance.
Sweep testing of coax runs, splitters and antennas to verify the installed distribution system.
Signal strength readings and coverage walks across the building, including critical areas, per the design and AHJ requirements.
Organized test reports and records to support AHJ and fire marshal acceptance.
Under IFC Section 510 and NFPA 1225, as your jurisdiction adopts them, many buildings need a signal booster so firefighters' radios work inside. Usually the system has to pass an acceptance test before the building gets its certificate of occupancy.
This applies to hotels, multifamily, data centers and mixed-use buildings. Bring the ERRCS install in early so it doesn't hold up occupancy.
Codes typically require coverage across most of the building, with stricter targets in stairs, elevator lobbies and fire pump rooms. Your AHJ sets the details.
Plan rated pathways and fire alarm tie-ins with the other trades before the walls close.
Our crew installed the system to the integrator's design: cable runs, antennas and clean cable management.
Send us your design and schedule. We'll tell you how fast we can staff it.
Dana Gundlach, President
(253) 234-50408520 Steilacoom Blvd SW, STE 101A #311, Lakewood, WA 98498
Superior Connects